Energy Saving

The ECONTROL will ensure air curtain performance is optimized whilst minimizing energy usage.  

Connecting the ECONTROL to the Invisidor STYLE couldn’t be easier – just plug one end of the cable in to the air curtain and the other end into the ECONTROL.

Then simply decide whether control is to be ‘Auto’ or ‘Manual’, and press the ‘On/Off’ button once to turn the Invisidor STYLE air curtain on and into ‘Manual’ mode, push it again to switch to ‘Auto’ mode and yet again to turn the air curtain off.

 

In ‘Auto’ mode the air curtain automatically adjusts the heat output to control the space at the selected set point temperature (range = 18 - 25°C) and optimize energy savings. The red arrow should be pressed to increase the set point temperature and the blue arrow pressed to decrease the set point temperature.

In ‘Manual’ mode the air curtain will not control space temperature but will simply provide the heat output selected – either zero, 50% or 100%. The heat output can be adjusted by pressing the red arrow to increase the temperature and the blue arrow to decrease the temperature.

Regardless of whether the air curtain is in ‘Auto’ or ‘Manual’ mode :

• pressing the blue arrow until the blue LED lights results in the heating being turned off and the air curtain operating in ambient mode.
• fan speed is selected by pushing one of the three fan speed buttons. The fan speed selected is indicated by an orange LED.